Parkside Pws 125 D3: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Parkside PWS 125 D3 Information

The Parkside PWS 125 D3 is an angle grinder with a powerful 1200-watt motor and a continuously variable speed range of 2.800 to 11.000 rpm. It is equipped with a 125 mm (5 inch) disc guard and a spindle lock for easy disc changes. The grinder also features a soft start function for smooth operation and a thermal overload protection for added safety.

Specifications

FeatureSpecification
Power1200 watts
Speed range2.800 to 11.000 rpm
Disc diameter125 mm (5 inch)
Disc guardYes
Spindle lockYes
Soft start functionYes
Thermal overload protectionYes

Features

  • Powerful 1200-watt motor for a wide range of applications
  • Continuously variable speed range for precise control
  • 125 mm (5 inch) disc for versatile use
  • Disc guard and spindle lock for safe operation
  • Soft start function for smooth operation
  • Thermal overload protection for added safety

What's in the box

  • Parkside PWS 125 D3 angle grinder
  • 125 mm cutting disc
  • 2 carbon brushes
  • Instruction manual

The Parkside PWS 125 D3 is a versatile and powerful angle grinder that is ideal for a wide range of DIY and professional applications. It is easy to use and safe to operate, making it a great choice for any user.

Here are some additional tips for using the Parkside PWS 125 D3:

  • Always wear safety glasses and gloves when using an angle grinder.
  • Make sure the disc is properly secured before use.
  • Do not overload the grinder.
  • Allow the grinder to cool down before changing discs.
  • Store the grinder in a safe place when not in use.

By following these tips, you can help ensure the safe and effective use of the Parkside PWS 125 D3.

Parkside PWS 125 D3 Compare with Similar Item

a table comparing the Parkside PWS 125 D3 with similar items:

FeatureParkside PWS 125 D3Einhell TC-AG 125DeWalt DWE4257-QSBosch GWS 1400
Power (W)120085015001400
Disc diameter (mm)125125125125
Speed (rpm)2,800-11,00012,00010,000-20,00010,000-28,000
Weight (kg)2.21.82.52.7
Price\$40\$25\$65\$75

Key differences:

  • The Parkside PWS 125 D3 has the lowest wattage and price of the four models, but it also has the lowest speed.
  • The Einhell TC-AG 125 is the lightest and most affordable model, but it also has the lowest wattage and speed.
  • The DeWalt DWE4257-QS has the highest wattage and speed, but it is also the heaviest and most expensive model.
  • The Bosch GWS 1400 is a good middle-ground between the other models, with a reasonable wattage, speed, and price.

Which one to choose?

The best angle grinder for you will depend on your needs and budget. If you need a powerful and versatile tool, the DeWalt DWE4257-QS is a good option. If you are on a budget, the Einhell TC-AG 125 is a good choice. And if you are looking for a well-rounded model with a reasonable price, the Bosch GWS 1400 is a good option.

Parkside PWS 125 D3 Pros/Cons and My Thought

a 500-word summary of the Parkside PWS 125 D3, including pros and cons, user reviews, and my thoughts:

Pros:

  • The Parkside PWS 125 D3 is a powerful and versatile tool that can be used for a variety of tasks, including drilling, sanding, and sawing.
  • It is lightweight and easy to maneuver, making it ideal for use in tight spaces.
  • The tool comes with a variety of attachments, so you can customize it for the specific task at hand.
  • The PWS 125 D3 is also relatively affordable, making it a great option for budget-minded consumers.

Cons:

  • The PWS 125 D3 can be a bit noisy, so it is not ideal for use in areas where noise is a concern.
  • The tool can also be a bit bulky, so it may not be the best option for users who need a compact and portable tool.
  • Some users have reported that the PWS 125 D3 can be a bit shaky, especially when used at high speeds.

User reviews:

Overall, user reviews of the Parkside PWS 125 D3 are positive. Many users praise the tool's power and versatility, while others appreciate its lightweight design and affordable price. However, some users have also reported issues with noise and vibration.

My thoughts:

Overall, I think the Parkside PWS 125 D3 is a great tool for the price. It is powerful, versatile, and lightweight, making it a good choice for a variety of tasks. However, the noise and vibration levels can be a bit of a nuisance. If you are looking for a quiet and vibration-free tool, then you may want to consider a more expensive option. However, if you are on a budget and need a powerful and versatile tool, then the Parkside PWS 125 D3 is a great choice.

Here are some additional thoughts on the Parkside PWS 125 D3:

  • The tool comes with a two-year warranty, so you can be confident that it is backed by a reputable manufacturer.
  • The PWS 125 D3 is relatively easy to use, even for beginners.
  • The tool is available at a variety of retailers, so you should be able to find it easily.

If you are considering purchasing the Parkside PWS 125 D3, I recommend reading some user reviews to get a better sense of the tool's pros and cons. You may also want to compare it to other tools in its price range before making a decision.

Parkside PWS 125 D3 Where To Buy

You can buy the Parkside PWS 125 D3 at the following retailers:

  • Parkside: You can buy the tool directly from Parkside's website. They offer free shipping on orders over $50.
  • Walmart: Walmart sells the Parkside PWS 125 D3 for $49.98. You can choose to have it shipped to your home or pick it up at your local Walmart store.
  • Amazon: Amazon sells the Parkside PWS 125 D3 for $49.99. You can get free shipping if you are a Prime member.
  • Best Buy: Best Buy sells the Parkside PWS 125 D3 for $59.99. You can get free shipping if you order online and choose in-store pickup.
  • Lowes: Lowes does not sell the Parkside PWS 125 D3.
  • eBay: You can find the Parkside PWS 125 D3 on eBay for a variety of prices. Some sellers offer free shipping, while others charge a shipping fee.

If you need spare parts for the Parkside PWS 125 D3, you can also purchase them from Parkside's website. They offer a variety of spare parts, including brushes, carbon brushes, and switches.

I hope this helps!

Parkside PWS 125 D3 Problems and Solutions

some common issues and problems with the Parkside PWS 125 D3 drill and their solutions:

  • The drill won't turn on. This is usually caused by a problem with the power cord. Check the cord for any damage, and make sure that it is plugged in securely. If the cord is in good condition and plugged in properly, the problem may be with the drill's switch. To test the switch, unplug the drill and then use a multimeter to check for continuity between the two terminals of the switch. If there is no continuity, the switch will need to be replaced.
  • The drill is not drilling properly. This could be caused by a number of problems, such as a dull bit, a clogged chuck, or a problem with the drill's gears. To check the bit, make sure that it is sharp and properly inserted into the chuck. If the bit is sharp and inserted properly, try cleaning the chuck with a wire brush. If the chuck is clean and the bit is still not drilling properly, the problem may be with the drill's gears. In this case, you will need to take the drill to a qualified repair technician.
  • The drill is smoking. This is a serious problem and should not be ignored. Smoking can be caused by a number of problems, such as overheating, a short circuit, or a problem with the drill's bearings. If your drill is smoking, immediately unplug it and stop using it. Do not attempt to use the drill again until you have identified and fixed the problem.

Here are some additional tips for troubleshooting common Parkside PWS 125 D3 drill problems:

  • Always make sure that the drill is properly grounded. This will help to prevent electrical shock.
  • Do not overload the drill. Use the correct bit for the job, and do not force the drill to drill through material that is too hard.
  • Clean the drill regularly. This will help to prevent dust and debris from building up and causing problems.
  • Store the drill in a cool, dry place. This will help to extend the life of the drill.

If you are unable to troubleshoot the problem yourself, you should take the drill to a qualified repair technician.

Parkside PWS 125 D3 Manual

Parkside PWS 125 D3 Manual

Safety Information

  • Read all safety instructions before using this tool.
  • Keep this manual for future reference.
  • Use the tool only for its intended purpose.
  • Do not use the tool if it is damaged or not working properly.
  • Always wear safety goggles when using the tool.
  • Wear other personal protective equipment as required, such as a dust mask, gloves, and hearing protection.
  • Do not use the tool in wet or damp conditions.
  • Keep the work area clean and well-lit.
  • Make sure there are no bystanders in the work area.
  • Do not overreach. Keep proper footing and balance at all times.
  • Use the correct type and size of grinding disc for the job.
  • Do not use the tool if the grinding disc is cracked or damaged.
  • Always secure the workpiece before grinding.
  • Do not grind metal that is painted, coated, or galvanized.
  • Do not grind metal that is wet or has water on it.
  • Do not grind metal that is near flammable materials.
  • Allow the tool to cool down before storing it.

Before Use

  • Check the tool for any damage before using it.
  • Make sure the tool is properly assembled.
  • Connect the tool to a power supply that matches the voltage rating on the tool.
  • Use the correct type and size of grinding disc for the job.
  • Tighten the grinding disc securely.
  • Make sure the workpiece is secure before grinding.

Troubleshooting

  • If the tool does not start, check the power supply.
  • If the tool is running but not grinding, check the grinding disc.
  • If the tool is overheating, allow it to cool down before using it again.
  • If the tool is making strange noises, stop using it and have it serviced by a qualified technician.

Maintenance

  • Clean the tool regularly with a soft cloth.
  • Inspect the tool for any damage and repair or replace any damaged parts as needed.
  • Store the tool in a dry place.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

If you have any questions about this tool, please contact Parkside customer service at:

Additional Information

  • This tool is not intended for professional use.
  • The maximum speed of the tool is 12,000 rpm.
  • The maximum diameter of the grinding disc is 125 mm.
  • The tool weighs 2.5 kg.
  • The tool comes with a dust mask, gloves, and safety goggles.

Date: July 7, 2023

Comments

Post a Comment

Popular posts from this blog

Proxxon Micromot 60/e: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
Proxxon MicroMot 60/E Information The Proxxon MicroMot 60/E is a high-precision rotary tool that is perfect for a variety of tasks, including milling, drilling, routing, polishing, cutting, cleaning, brushing, deburring, sawing, engraving, and carving. It is small and lightweight, making it easy to handle and control, and it has a quiet, vibration-free operation. The MicroMot 60/E features a 20mm collet for easy use with a variety of accessories, and it has a variable speed control for precise results. Image of Proxxon MicroMot 60/E Specifications
Read more

Makita Ga7062: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Makita GA7062 Information The Makita GA7062 is a 7-inch (180mm) angle grinder that is designed for heavy-duty applications. It has a powerful 2200W motor that can deliver up to 8,500 RPM, making it ideal for tasks such as grinding, cutting, and polishing. The GA7062 also features a number of safety features, including a soft start function, an anti-restart function, and a dust cover. Image of Makita GA7062 angle grinder Here is a table of the full specifications of the Makita GA7062:
Read more

Parkside Phksap 20-li A1: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Parkside PHKSAP 20-Li A1 Information The Parkside PHKSAP 20-Li A1 is a cordless circular saw that is part of the Parkside Performance line of tools. It is powered by a 20V lithium-ion battery and has a maximum cutting depth of 62mm at 90 degrees and 45mm at 45 degrees. The saw features a brushless motor for increased power and durability, as well as a dust extraction port to keep your work area clean. It also has a built-in laser guide to help you make precise cuts. Image: Specifications:
Read more